1132 Air Park Dr.
Aitkin, MN 56431
Phone: 218-927-2200
Toll Free: 800-428-9900
Fax: 218-927-2333
Email:
Explosion Proof Aerosol Can Crusher
Super 800 Model
What sets the Super 800 apart from the 200 and 450…
The Control System, Cooling System and Safety Interlocks!
Dependability - The Super 800 has an air/hydraulic logic control system with fewer parts, improving dependability!
Cooling - A forced-air oil cooling system allows continuous high-speed operation.
Safety- Interlocked motors allow the Super 800 crusher to operate only when the blower is operating.
Full Automation - Crushed can ejection to the rear makes automatic can feed available.
Processes many different aerosol can sizes with a wide range of can content, handling up to 800 cans per hour.
Separates liquid-can-content from propellants
and VOCs.
Removes and captures 99% of can contents, keeping hazardous materials out of the work place.
Provides an automatic processing cycle that begins with the operator inserting the aerosol can into the crushing chamber and closing the safety door. The machine then automatically opens, empties and crushes the aerosol can.
Crushes cans to 1/2-inch thick while emptying content. Crushed cans are considered empty by EPA definition
.Utilizes an explosion proof piercing and crushing system that has proven itself on millions of paint cans.
Incorporates a blower that pulls the VOCs and propellants from in and around the crushing chamber to create a "PTE" (permanent total enclosure).
Results!
The TeeMark Super 800 will crush a standard 8-inch aerosol can down to 1/2 inch. This typically leaves only 1% of residue in the can.
Specifications Crushing Force: 12,000 lbs. Cycle Time: 4.5 seconds Crushing Chamber: Handles cans from 4" - 12" long and 1.5" - 3" diameter.
Machine Weight: 1,200 lbs. Dimensions: 95" high, 65" deep, 70" wide Shipping Weight: 2,300 lbs Warranty: 1 year on all materials and workmanship
Electrical Requirements: Motors: The Super 800 uses three 230/460 three phase motors. These motors are powered by a 20/10 FLA three phase electrical service. Motor Starters for the individual motors are included. Air Requirements: 8 cfm @ 80-90 psi -- oiler, dryer and regulator provided
